Other Parts for making model horse drawn vehicles.
The supply of parts are very limited. I will try to list all that I can find here. I do not stock these now, I order from England. If I get a lot of requests I may stock them in the future. Allow 3 to 6 weeks for delivery.
Coachbolts and Nuts The bolts are chemically blackened steel and the nuts are brass. The four sizes are similar to those which Lenham Pottery used to sell, but scaled to specifications based on the actual full size bolts. See the table of dimensions below. The most popular size will be the smallest with a 1.6mm bolt and nut 2.3mm across face. This is equivalent to a full size nut nearly 3/4 inch across faces in 1/8th scale or about 1 inch in 1/12th scale and 3would be suitable for use on most carriages. The larger sizes will be needed for heavier vehicles and for axle bolts, etc.
Bolt A $12 for 10
Bolt B $11 for 10
Bolt C $20.40 for 20
Bolt D $20.40 for 20
See size chart below, all dimensions are in mms.
| Part # | A dim. | B dim. | C dim. | D dim. | E dim. | F dim. |
| Bolt D - $20.40 for 20 | 2.3 | 1.2 | 2.3 | 0.6 | 1.6 | 20 |
| Bolt C - $20.40 for 20 | 3.0 | 1.5 | 3.2 | 0.8 | 1.6 | 20 |
| Bolt B - $11 for 10 | 3.8 | 1.8 | 4.0 | 1.0 | 2.5 | 25 |
| Bolt A -$12 for 10 | 4.5 | 2.2 | 4.8 | 1.2 | 3.0 | 25 |
**********************************************************
Brass Axles These are complete with threaded brass domed nut.
4.8 mm diameter 76mm long $3.90 pair
6.4 mm diameter, 76mm long $4.15 pair
**********************************************************
Brass Axle Pins - Part # HW7 set of 4 for $1.00
**********************************************************
Solid Brass Carriage Lamps - Part # HW6 $5 a pair - this size lamp fits on a 1/20th scale Caravan as in the Hobby Kits
**********************************************************
Springs
Part # 347 $16.25 for a set of 4 springs - 100mm.
100mm Cast Leaf Spring can be used on the following plans:
1/12th Ledge (4 required)
1/8th Bow Top (4 required)
1/8th Dray (4 required) [Does not cover rear cross bridge spring]
1/8th Governess Cart (4 required) End would need to be slotted.
Part
#348 - $3.00 a pair - 51mm
Part #349 - $3.25 a pair
- 64mm
Part #1553/3 $3.50
a pair - 51mm
This one would be suitable for the Milk Float.
This is all I really know about parts. Ask for a shipping quote if you are planning to order.
Pre-made Wheels click here.